[Collection method] full parallel three-way synchronous collection;

【 Working temperature 】 70℃; (adapt to long-term field monitoring);

[Input impedance] 1MΩ/20pF;

【 A/D 】 24bit;

【 Sampling rate 】 10000sps;

【 Dynamic range 】 100dB;

【 Measuring range 】 ±10V;

[Power supply] Built-in lithium battery, working time ≥24 hours, with power indicator;

【 Dimension weight 】 150mm×100mm×52mm; 1.2kg;

[Protection level] IP52 (prevent large particles of dust from entering, waterproof splash);

[Measuring range] Vibration speed 0.001-35cm/s;

[Frequency response] 5~300Hz(standard sensor);

【 Display 】 320×240 pixels, 3.5 "LCD HD screen, all Chinese display;

[Built-in clock] The instrument has a built-in clock to accurately record the test time (accuracy to seconds);

[Communication interface] Standard USB interface;

[Working mode] Automatic mode (without any setting on site) and manual mode;

[Record length] in automatic mode, it is adaptive (when there is vibration, it will automatically record, and when the vibration stops, the collection will automatically stop); Manual mode can be divided into 7, respectively: 1 second, 2 seconds, 5 seconds, 10 seconds, 20 seconds, 50 seconds, 100 seconds, trigger negative delay is 0.3 seconds;

[trigger level] in automatic mode, it is triggered by intelligent judgment. Manual mode is divided into 12 gears, full scale (35cm/s) : 0.008cm/s, 0.017cm/s, 0.035cm/s, 0.07cm/s, 0.175cm/s, 0.35cm/s, 0.7cm/s, 1.75cm/s, 3.5cm/s, 7.0cm/s, 10.5cm/s, 14cm/s;

[Recording method] cyclic recording (data recording is completed once before entering the waiting record again);

【 Storage Capacity 】 Standard 4GB optional 8/16GB.

Configuration list: (The size is subject to actual items)

Blasting vibrometer 1 set

1 sensor

Instrument box 1 piece

Connecting cable 1 set

1 charger

Say the book 1

One USB flash drive